Made with 1-3/4" tubular webbing. A reinforced loop at each end.

Two different colors for easy identification.
Main Tether: Blue: 32" Long
Back-Up Tether: Red: 42" Long
Tensile Strength: 5,000 lbs.

Made in USA.

$27.50 (Blue) Main Tether 

$28.50 (Red) Back-Up Tether

1 3/4 Webbing
The Primary line  and Secondary line are sewn together to create one strong Zip Tether.
Lanyards are used for protection on high ropes courses, adventure courses, and industrial heights.
These are designed to meet the standards of high ropes course protection and many industrial requirements.
Used for positioning and safety lanyards provide light weight and superior strength.

                We offer the full line of Robertson's Double Zip Tethers.

Choose from the options below. Keep in mind that the first number is the primary line and the second number is the secondary line, except the 40" x 40" where

both lines are the same length.

Made in USA.

$54.50

The CMI Trolley Lanyard makes ziplining a cinch. A rider should have two separate lanyards attached to the trolley for a safe and secure ride. This usually requires two separate lanyards which can be a headache. Our new trolley lanyard solves that problem by using two sewn runners that are sewn together to provide the rider with both a main lanyard and backup lanyard in one compact unit. Using two different color webbing makes checking for lanyard wear easy. The Heavy Duty version  incorporates heavier webbing at all three attachment points for increased wear resistance.
Trolleylan: MBS: 6500lbs (28.9kN). Length: 42in (107cm).
Trolleylan HD: MBS: 6500lbs (28.9kN). Length: 42in (107cm).

Made in USA.

 
Carabiners & Zip Pulley sold separately.

$42.50 Standard

$52.25 Heavy Duty

1-3/4" Tubular Webbing with two hand loops and a D-ring to connect them to your zip pulley with a steel carabiner.(sold separately) Hand Holds are for holding onto for positioning purposes only. Participant should always be attached to Zip Pulley with Zip Tether even when using Zip Pulley Hand Hold. We also have a Hand Hold made from Rope.
Tensile Strength: 5,000 lbs.

Made in USA.

$9.00

1-3/4" Webbing with reinforced eye at one end and sliding V-ring at the other end.

Easily adjusted with a metal buckle on the body of the lanyard.
Adjust 39" - 6'6"
Colors: Black, BLue, Gray, Red, Yellow

Made in USA.

$68.00

Adjustable Lobster Claws without Zorbers or Hooks:
1-3/4" Webbing
Adjust 3' - 5'5"

Adjustable Lobster Claws without Zorbers or Hooks:

with or without Girth-Loop
1" Heavy Duty Webbing
Adjust 4' - 6'

Adjustable Lobster Claws with Zorbers and/or Hooks:

with or without Girth-Loop on Zorber

1" Heavy Duty Webbing
Adjust 4' - 6'

One of the best features of the 1" heavy duty webbing version of the adjustable lobster claws with hooks is that you get the full range of adjustment; unlike the 1-3/4" webbing that only has part of the body tapered for the hooks to be able to slide. Also, keep in mind, the double locking snap hooks are sewn into the lobster claws so they cannot be removed by the participants or staff. 

Minimum breaking stength: 5000 lbs.

Meets all ANSI and OSHA requirements.

Made in USA.

Non-Adjustable Lobster Claws without Zorbers or Hooks:
1-3/4" Webbing
1 leg 40 inches & 1 leg 46 inches

Non-Adjustable Lobster Claws without Zorbers or Hooks:

with or without Girth-Loop
1" Heavy Duty Webbing
1 leg 40 inches & 1 leg 46 inches

Non-Adjustable Lobster Claws with Zorbers and/or Hooks:

with or without Girth-Loop on Zorber

1" Heavy Duty Webbing
1 leg 40 inches & 1 leg 46 inches

Minimum breaking stength: 5000 lbs.

Meets all ANSI and OSHA requirements.

Made in USA.