Hot Dip Galvanized

These guy attachments provide an ecomonical and efficient means of fastening guys to poles. Well rounded wire grooves protect the bail of the strandvise or the cable from damage.

Fits 5/8" Bolts

45 Degree Ultimate Strength 10,000 lbs.

Hot Dip Galvanized

Guy Attachments provide an economical and efficient means of fastening guys to poles. Well rounded wire grooves protect the strand from damage. The formed steel style guy attachments feature a closed strand loop.                                          Wherever possible, installation should be made under the head of a machine bolt. Guy Attachments are not recommended to be mounted on the threaded end of a bolt as tensile and bending stresses on bolt threads can result in premature bolt failure less than the bolt minimum tensile strength.

Fits 5/8" Bolts

• Corner attachment clamps are used for angles of 35 degrees to 60 degrees.
• Accommodates 5/8-inch diameter pole mounting bolt.
• The inner pole mounting surface is curved with integral spurs for contact stability with the pole.
• The integral thimble eyes will accept deadending devices up to 1/2-inch diameter.
• Material: Ductile Iron
• 6" overall length, 2-1/2" between eyes.

• Cable suspension clamp D7903L (Top) is used with 5/8" diameter through bolt to support cable at poles on straight runs. Through bolt also serves as clamping member.Clamp includes two 1 5/8" carriage bolts. Accommondates strand size 1/4" throught 7/16". 

Length: 5 5/8"

• Cable suspension clamp D7902R (Bottom) is used with 5/8" or 3/4" diameter through bolt to support cable at poles at corner or angled runs. Through bolt also serves as clamping member. Clamp includes two 1 5/8" carriage bolts. Accommondates strand size 1/4" throught 7/16".

Length: 7"

Hot Dip Galvanized

For use on 3/8" or 1/2" steel cable. 5/8" diameter pin. 1/2" U-Bolts are recommended to be torqued to 480 ft lbs.

Wooden braces with galvanized steel ends.
A perfect way to keep the handrails of a Burma Bridge spread to the right size. Use pressure treated 4x4's with these brackets.
Picture shows a pair of Reversible Crossarm Braces attached to a utility pole supporting a 4x4 timber.
28" Long
Sold in Pairs

Galvanized Steel

An alternative to the wooden crossarm braces. These are also sold in pairs. Have rounded ends and are punched at one end with a 9/16" hole, with a 7/16" hole at the other end. Holes punched 1-inch from brace end to center of hole.

Length: 28"