Our Webbing Zip Tethers and Adjustable Lanyards are sewn using 1-3/4" tubular webbing in a variety of colors. Our Webbing Lobster Claws are sewn using yellow 1" heavy duty flat webbing. For those of you that prefer the 1-3/4" Lobster Claws we are still offering certain styles of those too. The minimum breaking stength is 5000 lbs. and the meet all ANSI and OSHA requirements. We offer Lobster Claws that are non-adjustable or adjustable. We offer them with or without double locking snap hooks and or Zorbers. We even offer a Zorber with a "girth-loop" so it can be girth-hitched to a harness without the need of a carabiner. Our adjustable lanyards have a sewn reinforced loop on one end, a sliding steel V-ring on the other end, and a steel buckle on the body to make the length adjustable.
1 3/4 Webbing
The Primary line and Secondary line are sewn together to create one strong Zip Tether.
Lanyards are used for protection on high ropes courses, adventure courses, and industrial heights.
These are designed to meet the standards of high ropes course protection and many industrial requirements.
Used for positioning and safety lanyards provide light weight and superior strength.
We offer the full line of Robertson's Double Zip Tethers.
Choose from the options below. Keep in mind that the first number is the primary line and the second number is the secondary line, except the 40" x 40" where
both lines are the same length.
Made in USA.
$54.50
The CMI Trolley Lanyard makes ziplining a cinch. A rider should have two separate lanyards attached to the trolley for a safe and secure ride. This usually requires two separate lanyards which can
be a headache. Our new trolley lanyard solves that problem by using two sewn runners that are sewn together to provide the rider with both a main lanyard and backup lanyard in one compact unit. Using
two different color webbing makes checking for lanyard wear easy. The Heavy Duty version incorporates heavier webbing at all three attachment points for increased wear resistance.
Trolleylan: MBS: 6500lbs (28.9kN). Length: 42in (107cm).
Trolleylan HD: MBS: 6500lbs (28.9kN). Length: 42in (107cm).
Made in USA.
Carabiners & Zip Pulley sold separately.
$42.50 Standard
$52.25 Heavy Duty
1-3/4" Tubular Webbing with two hand loops and a D-ring to connect them to your zip pulley with a steel carabiner.(sold separately) Hand Holds are for holding onto for positioning purposes only.
Participant should always be attached to Zip Pulley with Zip Tether even when using Zip Pulley Hand Hold. We also have a Hand Hold made from Rope.
Tensile Strength: 5,000 lbs.
Made in USA.
$9.00 (Only 2 left at this price)
Adjustable Lobster Claws without Zorbers or Hooks:
1-3/4" Webbing
Adjust 3' - 5'5"
Adjustable Lobster Claws without Zorbers or Hooks:
with or without
Girth-Loop
1" Heavy Duty
Webbing
Adjust 4' -
6'
Adjustable Lobster Claws with Zorbers and/or Hooks:
with or without Girth-Loop on Zorber
1" Heavy Duty
Webbing
Adjust 4' -
6'
One of the best features of the 1" heavy duty webbing version of the adjustable lobster claws with hooks is that you get the full range of adjustment; unlike the 1-3/4" webbing that only has part of the body tapered for the hooks to be able to slide. Also, keep in mind, the double locking snap hooks are sewn into the lobster claws so they cannot be removed by the participants or staff.
Minimum breaking stength: 5000 lbs.
Meets all ANSI and OSHA requirements.
Made in USA.
Non-Adjustable Lobster Claws without Zorbers or Hooks:
1-3/4" Webbing
1 leg 40 inches & 1 leg 46 inches
Non-Adjustable Lobster Claws without Zorbers or Hooks:
with or without
Girth-Loop
1" Heavy Duty
Webbing
1 leg 40 inches & 1 leg 46 inches
Non-Adjustable Lobster Claws with Zorbers and/or Hooks:
with or without Girth-Loop on Zorber
1" Heavy Duty
Webbing
1 leg 40 inches & 1 leg 46 inches
Minimum breaking stength: 5000 lbs.
Meets all ANSI and OSHA requirements.
Made in USA.