Hot Dip Galvanized

The #1 Washer especially when putting bolts thru trees is the 2-1/4" Large Round Washer.  It takes a tree longer to grow over the larger diameter.

Fits 5/8" Bolts

Now Available for 3/4" Bolts: 3" Diameter Round Washer

$0.75

Hot Dip Galvanized

Recommended for use on tree applications since trees have difficulty contending with the sharp points of square washers. Smaller in diameter than the Large Round Washer so trees will over-grow it quicker, why skimp? 

Fits 1/2" Bolts - 1-3/8" Diameter (For Carriage Bolts & Lag Screws)

Fits 5/8" Bolts - 1-3/4" Diameter

Fits 3/4" Bolts - 2" Diameter

Fits 3/4" Bolts - 3" Diameter

Hot Dip Galvanized

Used when putting bolts through poles and trees as a locking mechanism.

Available for 1/2", 5/8" or 3/4" Bolts

Hot Dip Galvanized

Used when putting bolts through poles and trees as a locking mechanism.

Available for 1/2", 5/8" or 3/4" Bolts

Hot Dip Galvanized

Flat Square Washer work well when bolting lumber.

3/16" thick X 2-1/4" square with 11/16" hole: Fits 5/8" Bolts

3/16" thick X 2" square with 11/16" hole: Fits 5/8" Bolts

3/16" thick X 2" square with 13/16" hole: Fits 3/4" Bolts

1/4" thick X 3" square with 11/16" hole: Fits 5/8" Bolts

1/4" thick X 3" square with 13/16" hole: Fits 3/4"

                                         Bolts

                                        1/4" thick X 4" square with 13/16" hole: Fits 5/8"                                               or 3/4" Bolts

Hot Dip Galvanized

The Curved Washers are contoured for bolting to poles. 

3/16" thick X 2-1/4" square with 11/16" hole: Fits 5/8" Bolts

1/4" thick X 3" square with 11/16" hole: Fits 5/8" Bolts

1/4" thick X 3" square with 13/16" hole: Fits 3/4" Bolts

1/4" thick X 4" square with 13/16" hole: Fits 5/8" or 3/4" Bolts

Hot Dip Galvanized

Ogee refers to the curved shape of this large, cast iron washer which is typically used in dock and wood construction. These oversized washers have a large bearing surface designed to prevent bolt heads and nuts from pulling into the wood.

Hot Dip Galvanized

We offer 1/2" Hex Nuts which are the same that we include with our 1/2" Carriage Bolts. We also offer 3/4" Hex Nuts which are included with our 3/4" Machine Bolts. The 5/8" and 3/4" Heavy Hex Nuts are the ones on our 5/8" Nut Eye Bolts and 3/4" Nut Eye Bolts. The 5/8" Square Nut is what you will find on our 5/8" Straight and Angled Thimbleye Bolts as well as Ovaleye Bolts.