$305.00

Starlight eXTReme! Series. Course hardware that takes you right to the edge and brings you back again! This is the finest indoor/outdoor course equipment on the market. We've engineered our new eXTReme! Series of hardware and equipment not just to meet, but to exceed the demanding worldwide requirements of professional adventure course operators. 

Our Two-Wheel Zip Pulley has stainless steel side plates, two 2" stainless steel wheels with ball bearing and stainless steel axles. With the gap between the side plates the pulley simply fits right onto the cable.

MBS: 14,000 lbs  

Fits 3/8" & 1/2" Cable

All CMI Trolleys can easily be rebuilt when the bearings or wheels wear out unlike some of the other trolleys that are simply disposible. Please contact us for your rebuild kit(s) when the need arrises.

$250.00  Made in USA

TWO-WHEEL ZIP PULLEY - eXTReme! SERIES Built-In Safety Backup System. Features dual side plates made from heavy gauge stainless steel with factory sealed ball bearings and specially treated stainless steel wheels with a surface hardness of Rockwell 71. Starlight's eXTReme! scissor-style pulley design incorporates a safety link backup system eliminating the need for a separate trailing pulley.

MBS: 14,000 lbs.

Fits 3/8" & 1/2" Cable

All CMI Trolleys can easily be rebuilt when the bearings or wheels wear out unlike some of the other trolleys that are simply disposible. Please contact us for your rebuild kit(s) when the need arrises.

$238.00  Made in USA

Our Mini 2-Wheel Zip Pulley-eTReme SERIES features stainless steel side plates, two 1-1/2" stainless steel wheels with ball bearing and stainless steel axles. It also has a second clip-in point that allows for a back-up tether.

MBS: 14,000

Fits 3/8" & 1/2" Cable

All CMI Trolleys can easily be rebuilt when the bearings or wheels wear out unlike some of the other trolleys that are simply disposible. Please contact us for your rebuild kit(s) when the need arrises.

$139.00  Made in USA

Key Features:

Rockwell case hardened 56-58 steel

Sealed ball bearings

Excellent for challenging outdoor environments

Built for to ⅜, ½, ⅝, ¾,” diameter cable

NFPA 1983-2012 Section 7.6.5.4 Pulley Performance Requirements- General Use

Minimum 3 sigma breaking strength (3σ MBS) of not less than 36 kN (8,093 lbs)

Independent test rated to 19,000 Lbs.

Tested to NFPA 1938-2012 Class G, exceeds ANSI and OSHA standards

The design of this pulley creates it's own back-up without the need for additional tethers. There is a center bolt that rides above the cable as well as the ends of the pulley being folded over that will keep the pulley from falling in the case if both axles were to fail.

Choose: 3/8"-1/2" or 5/8"-3/4"

   The Large Zip Tour Pulley represents the most advanced design work using state of the art engineering techniques to build the safest and finest trolley for the ropes course industry.  The 304 stainless steel frame is .101 thick for superior strength and trouble free use.  Unlike the competition it is assembled using machined 304 stainless axles which may cost more but gives the Large Zip Tour Pulley unparalleled structural integrity. The sheaves are 2" in diameter and case hardened to 56-58 Rockwell and ride on sealed ball bearings to provide excellent wear characteristics in challenging outdoor environments.  Built for 3/8" and 1/2" diameter cable.  Safety is always a primary objective and the Large Zip Tour Pulley  uses two additional back-up bolts should there be a catastrophic failure of the sheaves during use.  These two extra bolts also gives the Large Zip Tour Pulley superior stability.  The long hang down plates keep the clients hands away from the cable while allowing the client to maintain body alignment with the cable.

   Handles are not ment to be hung from, they are ment to keep the client facing forward on the ride. Optional hook-in points allow various positioning of the riders, making this pulley the ultimate for adventure parks.           

Exceeds A.N.S.I., OSHA, and NFPA class G standards
For 3/8" & 1/2" cable

$270.00  Made in USA

Efficient double pulley for travel along ropes and cables

$104.95

Impact surfaces for TRAC trolleys

Replacement impact surfaces for TRAC CLUB and TRAC GUIDE trolleys extend the life of the trolley. They limit the risk of pinched fingers and help position the connectors in order to reduce wear by abrasion on the cable.

Detailed description
Replacement impact surfaces for TRAC CLUB and TRAC GUIDE trolleys extend the life of the trolley.
Designed for adventure parks:
- limit the risk of pinched fingers
- integrated positioning support grooves for the connectors to limit abrasion on the cable
Available by pack of two or ten

Specifications
Material(s): nylon
Weight per unit: 15 g

SKUs
SKUs                   P023BB00          P023BB01
Inner Pack Count sold by pack of 2 sold by pack of 10
Guarantee           3 years              3 years

Trolley with optimal durability for adventure parks

TRAC GUIDE is a trolley designed for adventure parks. Featuring an ergonomic captive carabiner, it allows the guide to quickly install the trolley on the cable with one hand. Because the carabiner pivots, the trolley remains in position on the cable when it makes contact with the end brake of the zip line. The ends are equipped with protective impact surfaces to reduce the risk of pinched fingers, and two connector support grooves to help avoid abrasion from the cable. The JOKO and AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separation or loss. The carabiner’s reinforced construction provides greater resistance to damp and salty environments. Product life is extended with highly durable bearings and removable impact surfaces available as spare parts.

Detailed description
Trolley designed for adventure parks:
- Ergonomic captive carabiner allows the guide to quickly install the trolley on the cable with one hand
- Two aligned sheaves provide excellent stability on the zip line
- Because the carabiner can pivot, the trolley remains in position on the cable when it makes contact with the end brake of the zip line
- Front and rear impact surfaces limit the risk of pinched fingers
- Two positioning support grooves for the connectors limit abrasion from the cable
- JOKO or AVENTEX lanyards are directly integrated in the carabiner, limiting the risk of separating or losing the trolley/lanyard unit
- Connect easily to the harness with the CARITRAC stowing accessory (included)
Optimal durability for easy maintenance and extended product life:
- Double-row ball-bearings offer optimal durability
- Carabiner with reinforced construction and hard anodization for greater resistance to damp and salty environments
- Impact surfaces optimize contact between the trolley and the end brake of the zip line
- Carabiner and impact surfaces are completely removable and available as replacement parts to extend the life of the trolley
Available individually or in packs of five
Specifications
Cable diameter: 9 to 13 mm (may also be used on ropes)
Weight per unit: 425 g
Material(s): Aluminum frame and carabiner, stainless steel sheave, nylon
Certification(s): CE EN 17109, CE EN 12278, UIAA
Maximum speed: 25 m/s

References

Trolley Brake Block! The perfect companion to our Zip Pulleys. Carved from dense Appalachian hardwood and sealed with an environmentally safe preservative. The striking surface is crafted from ultra-high molecular weight polyethylene, noted for it's exceptional wear resistance. Steel hardware and a galvanized eye bolt round out the package. The missing component is 1/2" Shock Cord, we sell that too. We also have replacement Pads for the end of the Brake Block that gets smacked by the Zip Pulley.

Size: 8.25in x 3.375in 

$82.00  Made in USA

Crafted from an ultra high strength polymer designed to outwear some metals, nylons, and urethane. Designed for hard use and maximum UV resistance, the material has a low friction coefficient and is self-lubricating with a non-adherent surface. It's black color blends in with forest surroundings and galvanized hardware prevents rust for a long lifetime. Available in two different sizes to accommodate a wide range of cables. Mounts around cable and attaches to a static point with a bungee cord (not included). This brake block is sold as a component to an integrated braking system. It is designed to be used as part of a gravity based brake system and be attached to a shock cord. It should never be used alone or without a backup emergency brake in the event of a failure. There are two eyebolts installed in this block. One should be rigged to take the impact from the rider. The second should be connected to the first with a slack tether.

For 3/8" & 1/2" Cable

$175.00  Made in USA